PCE-DC1-ICA
Clamp on Tester
This ammeter was developed for the indirect detection of AC / DC currents as well as the frequency. A non-contact voltage tester function and a torch for illuminating the measuring point were also integrated in this ammeter. The small dimensions of this ampere pliers, allow use in hard to reach places. The large illuminated display of the ampere measuring instrument ensures a very good readability even in dark places, such as in control cabinets and cable ducts. The non-contact voltage tester not only helps you identify dangerous potentials, but also provides you with an accurate tool for finding broken wire positions.
3 2/3-digit LCD display, backlit, DC clamp
AC / DC current, AC voltage and frequency measurement
Measured value memory function, DCA zero point function, non-contact voltage tester
Integrated measuring point illumination
Automatic range selection
SPECIFICATION
AC current (50 / 60Hz)
Area 200 A
Resolution 100-mA
Accuracy ± 3.0% + 8dgt
DC power
Area 200 A
Resolution 100-mA
Accuracy ± 2.8% + 8dgt
AC voltage test 100V AC to 600V AC 50/60 Hz
(contactless test)
Frequency
Area 40 ... 50 Hz
Resolution 0.01 Hz
Accuracy ± 1.2% + 5dgt
Area 51 ... 510 Hz
Resolution 0.1 Hz
Accuracy ± 1.2% + 3dgt
Area 0.51 ... 1 kHz
Resolution 0.001 kHz
Accuracy ± 1.2% + 3dgt
Measuring point white LED
illumination
Conductor diameter 18 mm max.
Display 3 2/3 digit LCD display,
with white LED, backlit,
Care 2 x 1.5V AAA battery
Casing PVC
Dimensions 155 x 66 x 31 mm / 6.1 x 2.6 x 1.2 in
Weight 155 g / < 1 lb
Standardization EN61010-1; CAT II / 600V
EN61010-2-032; CAT III / 300V